11
Note:
Step 7 and 8 are only possible when you can reach the back of the unit inside
the dashboard.
Note
: Please observe the following safety instructions for the connection of the device:
- Read the entire installation section before connecting the device.
- Disconnect the negative pole of the vehicle battery for the duration of the installation.
- Observe the safety instructions by the vehicle manufacturer during this task.
- If you need to drill holes for the installation, make sure that no parts of the vehicle
are damaged.
- The cross section of the positive and negative cable may not be less than 2.5 mm².
- Do
not
connect any of the vehicle’s plugs and cables to the radio unless you have
the appropriate specialized knowledge of this process!
- Depending on the build of your vehicle, the installation may deviate from this
description.
- We do not assume any liability for damages caused by faulty installations or
connections, nor any subsequent damages.
- We recommend that you have the device installed by a specialized company. Then
you will have created the prerequisites for a problem-free functioning of the device.
If at any point during the installation you are unsure that you can correctly connect
the device by yourself, contact a specialist. A faulty installation may cause damages
to the device and the vehicle electronics.
To remove the unit,
CAREFULLY
remove
the front rim (do not use force, else the
connection pins of the rim will break off)
and place the two extraction keys into the
left and right side of the unit until they click
in place and pull the unit gently out of the
dashboard.