13
NOTE:
When connecting a device
via
the YPbPr or Back AV input, you must use the connection
cables to enable connection. See the illustrations on the left table.
•
You can use YPbPr to VGA cable to enable YPbPr signal via VGA input.
•
You cannot use VGA and YPbPr at the same time.
• To enable PC/YPbPr audio, you will need to use the back audio inputs with a YPbPr/PC
audio cable for audio connection.
•
When using the wall mounting kit (available from third party in the market, if not supplied),
we recommend that you plug all your cables into the back of the TV before mounting on the
wall.
•
Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the
module instruction manual for details of the settings.
•
The/Each USB input of your TV supports devices up to 500mA. Connecting devices that have
current value above 500mA may damage your TV.
•
By connecting an HDMI cable to your TV, you have to use only a shielded (high grade) HDMI
cable to guarantee a sufficient immunity against parasitic frequency radiation. And make sure
to use a High-Speed HDMI cable that can transmit high definition signals, such as 4K
contents, for trouble-free transmission.
