8
Basic Operations
Switching On/Off
To Switch the TV On
Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode either:
• Press
the
Standby
button,
Pro/-
or a numeric button on the remote control.
•
Or, press the side function switch on the TV until the TV comes on from standby.
To Switch the TV Off
• Press
the
Standby
button on the remote control
•
Or press the side function switch on the TV until the TV switches into standby mode
To power down the TV completely, unplug the power cord from the mains socket.
Note:
When the TV is switched into standby mode, the standby LED can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active. The LED can also blink when you switch on the TV from
standby mode.
First Time Installation
When turned on for the first time, the language selection screen is displayed. Select the desired
language and press
OK
.
On the next screen, set your preferences using the directional buttons.
Note:
Depending on the
Country
selection you may be asked to set and confirm a PIN at this point.
The selected PIN cannot be 0000. You have to enter it if you are asked to enter a PIN for any menu
operation later.
About Selecting Broadcast Type
Digital Aerial:
If
Digital Aerial
broadcast search option is turned on, the TV will search for digital
terrestrial broadcasts after other initial settings are completed.
Digital Cable:
If
Digital Cable
broadcast search option is turned on, the TV will search for digital
cable broadcasts after other initial settings are completed. According to your other preferences a
confirmation message may be displayed before starting to search. Select
YES
and press
OK
to
proceed. To cancel operation, select
NO
and press
OK
. You can select
Network
or set values such
as
Frequency
,
Network ID
and
Search Step
. When finished, press
OK
button.
Note:
Searching duration will change depending on the selected
Search Step
.
Analogue:
If
Analogue
broadcast search option is turned on, the TV will search for analogue
broadcasts after other initial settings are completed.
Additionally you can set a broadcast type as your favourite one. Priority will be given to the selected
broadcast type during the search process and the channels of it will be listed on the top of the
Channel List
. When finished, press
OK
to continue.
You can activate
Store Mode
option at this point. This option will configure your TV’s settings for
store environment and depending on the TV model being used, the supported features of it may be
displayed on the top of the screen as an info banner. This option is intended only for store use. It is
recommended to select
Home Mode
for home use. This option will be available in
System>Settings>More
menu and can be turned off/on later.
Depending on the model of your TV and the country selection
Privacy Settings
menu may appear at
this point. Using this menu you can set your privacy privileges. Highlight a feature and use Left and
Right directional buttons to enable or disable. Read the related explanations displayed on the screen
for each highlighted feature before making any changes. You can use
Pro/-
buttons to
scroll up and down to read the entire text. You will be able to change your preferences at any time
later from the
Settings>Privacy Settings
menu. If the
Internet Connection
option is disabled
