User’
s Manua
l
31
When setting the time offset from Greenwich Mean Time, make sure that the time
offset does not include daylight saving time.
Menu Transparence:
You can change the menu brightness by adjusting the transparency
level of the On-Screen Display (OSD). Press
key to pop up a drop-down list. Press
keys to select a proper transparence level.
Audio Decode:
The unit can output two types of digital audio signals via the S/P DIF
connector. One is an encoded signal, and the other is a decoded signal. If your digital audio
system does not have a Dolby Digital decoder, you have to set the option to “PCM”. Oth-
erwise, set it to “Dolby Digital”.
Note: If the channel you are currently watching does not provide Dolby digital, you
cannot watch the program with Dolby sound even though you set the option to AC3.
PIP:
Refer to
3.8 Picture in Picture (PIP).
9.2 Modify Password
The local password is required to view locked channels (See
8.2 Lock Channel
), or access
some menus, such as Channel Edit, Software Update, Resume Default, etc. The password is
set to
0000
by default. You can change this password if necessary.
Select Main Menu ? Setting ? Modify Password
and press
OK
key to enter. The password is needed
to activate the setting.
1. Press number keys to input new password.
2. Press number keys to input new password
again for confirmation.
3. Press
EXIT
key to save and exit.
Note: In case you lost your password, please
use the Master Unlock Code “8101”.
9.3 PG (parental) Lock
You can set parental control for program.
Select Main Menu ? Setting ? PG Lock and press
OK
key to enter. The password is needed to activate
the setting.
1. Press
key to pop up a sub-menu consists of
different parental control levels.
2. Select a proper level and press
OK
key to con-
firm.
Note: The password is required to view pro-
grams beyond set level.
9.4 Resume Default
Warning: This function will restore system
settings to factory default.
Select Main Menu ? Setting ? Resume Default
and press
OK
key, a warning box pops up for con-
firmation. Select “OK” and press
OK
key to confirm
or select “EXIT” and press
OK
key to cancel the
operation. System will reboot after restoring.
