background image

User’

s Manual 

 

 

 

30 

8.4 Delete Channel 

Note:  A deleted channel cannot be  accessed 
unless you search for it again. 

1.  Press 

 keys to select a channel. 

2.  Press 

 key to pop up a drop-down list. 

3.  Highlight “Delete” and press 

OK

 key to mark this 

channel with “ ”. If you want to cancel this set-
ting, press 

OK

 key again. 

You can also delete all channels if  “Delete All” is 
selected. 

After  above setting,  press 

EXIT

 key  and  a message box pops up for confirmation.  Select 

“OK“ and press 

OK

 key to confirm or select “EXIT” and press 

OK

 key to cancel the operation.

 

9. System Setting 

9.1 Common Set 

You can to configure the video and audio settings appropriately to your TV set and other ap-
pliances. 
Select Main Menu ?  Setting ?  Common Set and press 

OK

 key to enter. 

Menu Language: 

Press 

 key to pop up a drop-down list. Press 

 

keys to select a 

language for menu and press 

OK

 key to confirm. 

Aspect Ratio:

 To view wide screen programs on a non-wide screen TV, set the option to 

Letter Box or pan-scan. Wide-screen pictures then will be reduced to fit to the width of the 
normal screen. 

Resolution:

  The  unit supports various video 

resolutions: 1080P, 1080i, 720p or 576p. The 
resolution of 720p, 1080P and 1080i are con-
sidered high definition. The higher resolution the 
better quality you can enjoy. However, if your TV 
set does not support high definition, you cannot 
enjoy high definition quality picture. You can set 
the option to the highest resolution your TV can 
display. If you know your TV’

s native screen 

resolution, you may achieve a better picture by 
setting it to that resolution. The  unit will then 
convert all video output to the selected setting. 

Note: You can only view standard definition video with the composite video con-
nector (VIDEO). 

Time Zone Set: 

Make sure that your local time is displayed correctly on this option, oth-

erwise, press 

 key to pop up a drop-down list, then press 

 

keys to select the time 

zone in which you live. 

Close Caption: 

Set 

CC

 key function. Press 

 key to pop up a drop-down list. Press 

 

keys to select “On” or “Off”.

 

Daylight Saving Time: 

If daylight saving time is observed in your state at the moment, set 

the option to “On”. 

Note: Daylight saving time adds one hour to the time when the option is set to “On”. 

Summary of Contents for HDR2700T













































Reviews: