background image

User’

s Manua

 

 

 

Learning Key   

The HDR2700T RCU has some learning keys at the upper left side. The keys (except 

SET

 key) 

can be used to memorise corresponding key values of TV RCU. After learning, the HDR2700T 
RCU can be used in correspondence with the TV. 
The recommended keys for the HDR2700T RCU to learn from your TV RCU are as follows:

 

POWER

TV/AV

VOL+

 and 

VOL-

. The TV/AV identifiers vary with different types of TV RCU. 

 

Instructions: 

1.  Hold down the 

SET

 key on  the  HDR2700T RCU 

for  about 2 seconds, the indicator  status changes 
from low light to high light,  and  then  release the 

SET

 key. 

2.  Press  a  learning key on  the  HDR2700T RCU 

(such as 

TV  POWER

 key),  the  indicator  light be-

gins to flash slowly. 

3.  Aim  the  TV RCU  at  “receiving window”  of  the 

HDR2700T RCU and press the corresponding key 
on the TV RCU (such as 

POWER

 key) to be learnt. 

The indicator  light will begin to flash quickly, then 
remain brightly illuminated indicating the learning 
process has been successful. 

4.  Repeat step 

2

 and 

3

 to set other learning keys in 

the same way. 

5.  After setting, press 

SET

 key to exit, and indicator 

is off. 

If the operation fails, please try again according to 
above steps. 

Notes: 

 

During setting, put the two RCUs on same horizontal surface and the space between 
them should be within 5cm.   

 

If there is no operation in 10 seconds,  the  unit’

s RCU will exit  from learning mode 

automatically. 

 

You can operate the learning  function many  times, but only the last one will be 
saved. 

 

Some TV RCUs may not support this function. 

 
 
 
 
 
 
 
 
 
 

Summary of Contents for HDR2700T













































Reviews: