Teac GX-1, Instruction Manual

Page: 45 / 122

Basic Operations
3-18
You can use the easy-to-use remote controller ER-GXRC to
start and stop recording/reproducing, and to attach event marks
to data. The remote controller can be used in conjunction with
operations from the PC.
■
Connecting
Use the dedicated cable to connect the remote controller to the
ER-GXRC connector at the rear of the GX-1.
Note:
It does not matter whether the power to the GX-1 is turned on
before or after you connect the remote controller.
■
Functions of Each Button
ER-GXRC REMOTE CONTROL UNIT
START STOP
REC
STANDBY
EVENT
Puts system in the Record Standby status.
Starts recording if pressed
in the Record Standby sta-
tus. In reproducing mode,
starts reproducing.
Stops recording if pressed in the Record
Standby status or during recording.
In reproducing mode, stops reproducing.
Writes an event mark
if pressed during
recording.
External dimensions : Approx. 90W x 30H x 55D (mm) (excluding protruding parts)
Mass : Approx. 160 g (excluding the cable that is approx. 90 g)
Using the Remote Cotroller