Teac GX-1, Instruction Manual

Page: 105 / 122

Amplifiers
4-38
■
Digital Monitor
The waveform display for the digital input/output amp shows High/Low of each bit
as shown below:
Shows the current setting.
Select “1” when recording is triggered by High, or “0” by Low. If * is
selected, the bit is ignored.
Select the channel that you want to set.
When multiple bits are set, select whether to AND or OR them.
●
The value is displayed in hexadecimal.
■
Digital Input Trigger Setting
High/Low change of specified bits of digital input channel can trigger recording. To
set trigger conditions, click the channel of digital input/output amp on
Trigger Rec
box and and then click Digital I/O .