Safety and Precautions
To ensure safe and reliable operation of the TV set, the following precautions must be observed in installation, operation and
maintenance.
Precautions
1. Pay attention to the power cord before installing the TV set. Do not attach anything on the power cord, and avoid treading on the
power cord. The power supply on socket must not overload. The power cord must not be extended without permission, and increased
care shall be taken for integrated sockets, as these may cause electrical shock or fire.
2. The vent on the housing back and the DVD tray on front must not be blocked or covered. The TV set must not be placed close to a heat
source, or it will damage the TV set.
3. This TV set can only use the supply voltage and frequency indicated on the back of housing. If your house power supply does not
conform to the indication, please consult your service personnel.
4. It is strictly forbidden to drop any metal article into the housing vents or the DVD door on front. It is strictly forbidden to have any liquid
flow into the machine, as it will cause short-circuit in the TV set.
5. It is strictly forbidden to subject the TV set to rain or use it in a damp environment. When cleaning the TV set, be sure to remove the
plug from the power supply socket. Do not directly clean the housing with liquid detergent, but it can be wiped with a damp piece of cloth.
Be sure to remove the plug from the power supply socket during a thunderstorm or when it is not used for long time, and the antenna
plug should also be removed, to avoid damaging the parts by lightning.
6. When an indoor antenna is used, do not allow the antenna to contact other electrical appliances, to avoid interfering receiving TV
program.
7. Never use accessories not recommended by manufacturers, as it may cause danger. It is better to use original carton and packaging
materials when handling the TV set.
8. When the DVD function is not used for a long time, the parts operation may not be ideal, so please use the DVD function occasionally
to prevent abnormality.
9. To prevent picture quality deterioration and sound distortion, keep your TV set away from radio sets or other articles with magnetic
fields.
10. If there is condensation on the DVD laser head, do not use the DVD play function, or it may damage the internal parts of DVD.
(Insert the power cord plug into the power supply socket and switch to DVD status and place it for 2-3 hours. This will pre-warm the DVD
2
Safety
1. Do not remove the back cover without permission, as the high voltage inside the TV set may cause danger. If it is necessary to
remove the back cover, it should be done by a specialized service person.
2. In case of the following, please remove the power supply plug of the TV set from the socket, and contact the service personnel.
(1) There is damage or break in the power cord and plug.
(2) Foreign matter or liquid has entered the TV set or DVD cassette.
(3) The TV set performance has obvious deterioration or there is damage on housing.
3. Please remove the plug from the power supply socket when the TV set is not used for a long time.
4. Heavy object must not be placed on the machine, or the machine be treaded. Otherwise, it may cause serious personal damage or
damage to the machine.
5. Keep your finger away from the tray when closing the DVD tray, or it may cause personal injury.
6. The outdoor antenna must not be erected close to HV lines or other power lines, and great care shall be taken in erecting antenna. It
is strictly forbidden to contact the power line, or it may lead to fatal injury.
