DVD PLAYER OPERATION
Basic Operation
1. Press "DVD" button on the front panel of the TV or the "AV " button on the remote controller to switchover to DVD play mode .
2. Press OPEN / CLOSE button to load disc in disc tray.
3. Press OPEN / CLOSE button to close the tray.
Hold the disc without touching either of its surfaces, position it with the printed title side
facing up, align it with the guides, and place it in its proper position.
DVD Setup Mode
Setup Mode provides the menu for the configuration of
GENERAL SETUP PAGE
,
ANALOG AUDIO SETUP PAGE
,
DOLBY DIGITAL SETUP
,
VIDEO SETUP PAGE
and
PREFERENCE PAGE .
Item selection in the Setup Menu is done by using the Navigation Arrows,
SETUP
button and the
ENTER
/
4
button.
Firstly press the
SETUP
button, enter into
SETUP
menu, then press the
DIRECTION RIGHT
button, you can enter into the next
Sub-menu.
Press the
DIRECTION LEFT
button step by step to go back the last menu, until exit the
Setup
Menu,
1.GENERAL SETUP
ANGLE MARK
This only works when there is an
angle mark on the disc. Select
ON, the screen shows the mark
when playing DVD.
ON
OFF
OSD LANGUAGE
(ON SCREEN DISPLAY)
This is used to select the OSD language.
ENGLISH
11
TV DISPLAY
4:3 PANSCAN
This is selected when the DVD
player is connected to a normal 4:3
TV. Wide-screen images are shown
on the screen, but with some parts
cut automatically.
4:3 LETTERBOX
This is selected when the player is
connected to a normal 4:3 TV.
Wide-screen images are shown on
the screen, with black belt on the top
and bottom.
16:9
This is selected when the player
is connected to a wide-screen TV
.
GENERAL SETUP PAGE
4:3 PANSCAN
SET TV DISPLAY MODE
4:3 LETTERBOX
CLOSED CAOTIONS
SCREEN SAVER
DIGITAL OUTPUT
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
16:9
DOBLY
SCREEN SAVER
ANGLE MARK
CLOSED CAOTIONS
DIGITAL OUTPUT
OSD LANGUAGE
TV DISPLAY
SET ANGLE MARK
OFF
GENERAL SETUP PAGE
ON
DOBLY
SCREEN SAVER
ANGLE MARK
CLOSED CAOTIONS
DIGITAL OUTPUT
OSD LANGUAGE
TV DISPLAY
SET ANGLE MARK
OFF
GENERAL SETUP PAGE
ON
DOBLY
ENGLISH
SET OSD LANGUAGE