Teac CD-P750 DAB, Owner'S Manual

Page: 22 / 284

Selecting tracks directly
The number buttons on the main unit and the remote control can
be used to directly enter track numbers.
For track numbers, a maximum of two digits can be input for audio
CDs and three digits for data CDs.
Enter the track number digits in order, starting with the largest.
Playback starts after the track number is input.
Audio CD track number entry
Set with two digits.
Example: for track 9, input
0
w
9
Data CD/USB/SD track number entry
Set with three digits.
Example 1: for track 105, input
1
w
0
w
5
Example 2: for track 4, input 0
w
0
w
4
o
After five seconds pass during track number input, playback
of that track number will start.
o
Playback can also be started by pressing the main unit
PLAY
(
7
)
button or
MULTI JOG
dial or the remote control
7
or
ENTER
buttons.
For example, track 7 can be played in the following ways.
o
7
w 7
o
7
w
MULTI JOG / ENTER
o
7
w
(wait 5 seconds)
NOTE
i
If you input the wrong number, you can press the
CLEAR
or
STOP (
8
)
button to delete the input value.
i
The largest number that can be shown for the currently playing
track is 999. If the track number exceeds 1000, only the last
three digits will be shown.
i
In random mode, the number buttons cannot be used to set
tracks.
i
Track numbers that do not exist cannot be input.
Folder playback (SD cards and
USB flash drives only)
When the current source is
USB
or
SD
and the playback area is
folder ( icon shown), the selected folder (the current folder) can
be set as the playback area.-
In the procedure explained below, you can select a track and set
the folder that contains that track as the current folder.
1.
Select
USB
or
SD
as the current source. (see “Selecting the play-
back source” on page 19)
2.
Set the playback area to folder ( icon shown). (see “Setting
the playback area” on page 21)
USB MP3
001
3.
Turn the main unit MULTI JOG dial or use the remote control
.
/
/
[
l
/
;
] buttons to select a track/folder.
The top line of the Home Screen shows the file or folder name,
and the icon starts to blink.
USB 02.File2.mp3
001
USB Folder01
001
USB Folder02
001
USB Folder03
001
USB 01.File1.mp3
001
NOTE
i
To cancel track/folder selection, press the
CLEAR
button on the
main unit or remote control.
i
If you select a folder that does not contain any audio files,
NO FILE
will be shown. At this time, if you turn the main unit
MULTI JOG dial or press the
.
/
/
[
l
/
;
] buttons, the
name of the currently selected file will be shown and move-
ment might become impossible. If this happens, press the
CLEAR button on the main unit or remote control to cancel
selection. Then, try again.
i
The current folder will change along with movement between
folders.
4 – CD/SD/USB playback (continued)
22