Introduction
TEAC CD-ROM Installation Guide
2
Introduction
Thank you for purchasing the TEAC 52X speed CD-ROM drive. This product is
designed to provide maximum CD-ROM playback performance, enjoyment and ease
of use. Refer to Recommended System Requirements to ensure the drive’s proper
52X maximum performance.
The TEAC 52X speed CD-ROM drive can read certain data up to 52 times faster than
conventional speed CD-ROMs. It also plays lower speed titles at their respective
speeds. It is easy to operate, dust-proof, and features a convenient power tray for disk
loading.
Tools You May Need
Depending on the design of your computer, you may need a flat-blade (—)
screwdriver, a Phillips (+) screwdriver, and/or a pair of needle-nosed pliers to
complete the installation of the CD-ROM drive.
Recommended System Requirements
❑
IBM PC-compatible computer, Pentium® 133 MHz or higher
❑
Intel Triton or compatible chip set with PIO mode 4 or UDMA mode 2 settings
❑
8MB of RAM minimum
❑
Available half-height drive bay
❑
Standard or enhanced IDE/ATAPI adapter card or a motherboard with an avail-
able IDE/ATAPI interface connector
❑
Windows 98SE/Me/2000/NT 4.0/XP
Drive Orientation
Install the TEAC 52X CD-ROM drive into your computer either horizontally or
vertically. For a horizontal orientation, install the drive so that the eject button is
located on the right side of the unit. See the figure below. For a vertical orientation,
you can install the drive in either direction (i.e., with the headphone jack or the eject
button near the top).
Notes:
❑
Please read this installation guide thoroughly before you begin the installation.
❑
Performance may vary depending on system CPU speed and system settings.
vertical
horizontal installation
installation
options
CD-552Eshort.fm Page 2 Wednesday, May 14, 2003 10:29 PM
StockCheck.com
