Teac AG-680, Owner'S Manual

Page: 3 / 92

– 3 –
ENGLISH
CONNECTIONS
CAUTION:
…
Do not plug the power cord of any component into AC
outlets and do not turn their POWER switches on
until all connections have been performed.
…
The cable connectors should be fully inserted into the
jacks. Loose connections may cause hum and noise.
…
Read the instructions for each component you intend
to use with the receiver.
+ –
L L
R R
White White White
Red Red Red
Audio connection cords
To make these connections, use interconnect cords with RCA
plugs. Make sure that you connect the white pin-plug to the white
jacks (left) and the red pin-plug to the red jacks (right).
Turntable
Speakers B
CD Player
Refer to "Connecting Antennas" on pages 4~5.
LINE OUT LINE IN
Tape Deck
Speakers A
To AC outlet
Video Deck (VCR)
LINE OUT
AUDIO OUT
Connecting Audio Equipment
AUDIO signal jacks
PHONO IN jacks
Connect the turntable's output jacks to the PHONO IN
jacks.
CD IN jacks
Connect the CD player's output (LINE OUT) jacks to the
CD IN jacks.
TAPE MONITOR (PLAY/REC) jacks
Connect the cassette deck output (LINE OUT) jacks to
the PLAY jacks.
Connect the cassette deck input (LINE IN) jacks to the
REC jacks.
VIDEO/AUX jacks
Connect the video deck (VCR) LINE output (AUDIO
OUT) jacks to the VIDEO/AUX jacks.