RBK-X1C
PN 2376800-1
Page 17 Rev. A Dec. 2020
3.3 Sequence Setting
In this interface, operator can pre-set/edit Sequence stored in the 15X Sequence.
To edit the parameter stored in Sequence:
1. Switch
to
, allow the operator to edit the parameter.
2. Click on this icon
to select the Sequence to be edited. 1#, for example.
3. Click on the
4. Press on the quick buttons according to the sequence you would like to set. (3
2
1
3
5, for example)
5. You would find the quick button you selected will show on
Currently, touch screen can store 15X sequence. Each sequence contains 10X process.
6. Turn it back to icon
, parameter will store in the sequence 1#
7. Switch
to
, exist editing.
8. Click on
, to back to main interface.
Note:
The parameter (Temperature & Time) stored in 10X quick button can review from below area.
It would help for editing Sequence.
Parameter editing for quick button, refer to section 3.1 Heat Parameter
Summary of Contents for RBK-X1C
