TE Connectivity RBK-X1C, Customer'S Manual

Page: 15 / 65

RBK-X1C
PN 2376800-1
Page 14 Rev. A Dec. 2020
3. Software
The software serves as the processor's central control unit. With this you can set the procedures
for product processing. The software is operated via a touch screen.
When the heater is powered on, the main interface is displayed as
shown in this picture..
Press the TE logo to log on.
3 level authority to log on:
• “
OPR
”
----
user ID: “A”, password: “0000”
• “
EGR
”
----
user ID: “B”, password: “12345”
• “
MFG
”
----
user ID: “C”
, (TE kept)
(password can be edit by higher authority.)
Input ID and password in this window.
For example, if you are trying to log on as Engineer,
input “B” in user ID
column, and input “12345” in Password column.
Then click on “OK” button.
The main interface already have 2 changes:
1. ID icon is showing you access as engineer.
2. On the bottom right appear a column. Click on it, would appear a
drop-down list.
In this drop-down list, you can choose the setting item, like show on
below table.
Access right for setting item No log on OPR EGR MFG
Main Interface (Single production)
Sequence production
-
Production setting
-
Auto Calibration
Heat parameter
- -
Sequence setting
- -
Maintenance
- -
Manual Calibration
- -
Remote
-
Error Log
- -
System Parameter
- - -
Circle Test
- - -
I/O & Manual
- - -
Centering Manual
- - -
Bar code scanning
- -
B
12345