RBK-X1 CE
PN 2234800-2 / -4 / -6
Page 28 Rev B Apr 2020
4.
Installation and Operation
4.1 Installation
4.1.1
Unpacking
Remove the RBK- X1 from its packing. If there is any sign of damage, return the equipment to TE in its
original container.
Note:
The Serial Number on machine must correspond with the Serial Number on the packaging.
4.1.2
Safety
RBK- X1 must be installed in accordance with established safe working
practices. Incorrect use can cause injury.
Installation requirements must conform to local regulations.
4.1.3
Location
RBK- X1 is designed to be installed and operated in industrial environments.
However it should not be used near explosive or flammable materials or in a
location where it would be subject to moisture.
The Processor is a manually operated device and should be sited on a flat level
surface, at a height suitable for an operator - a sturdy workbench is ideal.
Take care to ensure that the ventilation fan on the back panel is not
obstructed.
4.1.4
Electrical Connections
The Processor is designed for operation from a 230V 50Hz mains supply and
is supplied with a 1.5 meter power line.
Power connections for the machine must conform to local standards and
regulations.
Summary of Contents for RBK-X1 CE
