TE Connectivity RBK-X1 CE, Customer'S Manual

Page: 27 / 55

RBK-X1 CE
PN 2234800-2 / -4 / -6
Page 26 Rev B Apr 2020
3.10 Error Log
Error Possible Reason Action
Power off!
The machine isn't powered off in right process
1. Emergency stop button be pushed
2. The power supply is cut
1. Check the emergency stop button was
pressed or not
2. Check the power supply of machine
Load position timeout!
1. Load position sensor error
2. The heating chamber be jammed
3.The motor error
1. Check load position sensor
2. Check the heating chamber be jammed or
not
3. Check the motor
Home position
timeout!
1. Home position sensor error
2. The heating chamber be jammed
3.The motor error
1. Check home position sensor
2. Check the heating chamber be jammed or
not
3. Check the motor
Standby time is up!
The time that operator doesn't operate the machine is longer
than the stan-by time, the machine is in standby mode
automatically
Press the IO button for 5s to power on the
machine
Failed to find home
position!
When power on the machine the heating chamber isn't on
home position, and push two hands buttons, the heating
chamber can't back to home position
1. Check home position sensor
2. Check the heating chamber be jammed or
not
3. Check the motor
Emergency stop! Emergency stop button be pushed Release the emergency stop button
Setting temperature
too high!
Setting temperature value is higher than 675
℃
Reset the temperature value lower than 675
℃
Temperature error! Actual temperature is higher than 675
℃
1. Check the temp sensor
2. Check the temp controller
Temp controller
comm error!
1. The communication cable between PLC and temp
controller is damaged
2. The PLC communication port is damaged
3. The temp controller error
1. Check the communication cable between
PLC and temp controller
2. Check the PLC communication port
3. Check the temp controller