ADCP-96-088 • Issue 2 • 6/2013
Page 32
© 2013, Tyco Electronics Corporation. All Rights Reserved.
Figure 27. Route and Secure Distribution Cable Subunits - (Panels 7 – 12)
19. Locate the weather-seal strip attached to the right side of the cabinet grounding system as
shown in
.
20. Push the free end of the #6 jumper cable through the hole in the weather-seal strip that
corresponds to the cable position of the fiber optic cable.
Note:
The fiber optic cables are numbered 1–14 starting with the first cable on the right
side of the center partition and continuing with the first cable on the left side of the center
part ion (see
). The holes for the grounding cables are numbered 1–14 starting
with the top opening in the weather-seal strip.
7
8
9
10
11
12
PANEL 12
PANEL 11
PANEL 10
PANEL 9
PANEL
8
PANEL 7
21822-A
NOTE: SHOWN WITH
CABINET ENCLOSURE
REMOVED.
RIGHT SWINGFRAME
PANELS 7 - 12
