114-94467
Rev. C
20
of 31
Figure 24
Step 8
Dismantle the wires and crimp the contacts: 35 mm² DC-HV cable
Remove outer insulation, shielding braid and inner insulation acc.
Figure 25
Wire Size
Removal of insulation dim. "A"
Removal of shielding
dim “B”
35 mm²
23,5 ± 0,5 mm
31 ± 0,5 mm
Table 6
Crimp conductor to the PIN DIA8.0 POWER DC 2292542-2 with the specified tools listed in
. The crimp
must fulfil the requirements from
Chapter 5
ATTENTION: It must be ensured that no shielding braid is closer than 5 mm to the conductor and/or the
contact. Otherwise the HV requirements regarding clearance and creepage distance cannot be fulfilled!
