39
Lift Control
To configure lift control, a GARDiS IO Extension board must be used.
Step 1 Configure the reader
Select the reader that is controlling the lift outputs. Click
Site Configuration
from the top menu, then
click
Readers
and select required reader from dropdown menu.
Set the name of the reader to allow easy identification during unit setup.
Step 2 Add the GARDiS IO Extension Module
Go to
Site Configuration
and click
Extensions
and then
Add
. Click
Create GARDiS IO EXT
from the main
display. The following screen will be displayed. Have the ID of the GARDiS IO EXT ready. This is located
on the unit, printed on the label.
Summary of Contents for GARDiS Series
