24
Door properties
This tab allows the configuration of properties relating to the door equipment.
Lockstrike off mode
End of open door command:
This sets the lockstrike to off when the door is opened. To use this
function, set the
Door sense
property.
Allow access group delay:
This allows access groups to use their own defined lock time.
Lock time
: Number of seconds to release the lock relay. Setting to 0 will toggle the relay.
Maximum value 255.
LED output
: Options to drive the behavior of the reader LED.
•
Trigger by door release
: When the door relay is activated display success.
•
Trigger by door sense
: When the door is opened display success.
•
Trigger by door sense and lock state
: This can be used in conjunction with End of open
door command.
Conditional input:
This is linked to the conditional I/P connection available on the unit. By default this is
set to
Disabled
. Available options:
Vehicle Detection NO
Vehicle Detection NC
Intruder Armed NO
Intruder Armed NC
Break glass monitoring NO
Break glass monitoring NC
Request to exit:
This is linked to the Exit button connection on the unit. By default this is set to Disabled.
Set to the required polarity i.e. Normally opened (NO) or Normally Closed (NC).
Operating schedules
: The request to exit button can be configured to be enabled only during
a schedule. By default it is set to
Always enabled
.
Door Sense:
This is linked to the Door sense connection on the unit. By default this is set to Disabled. Set
to the required polarity i.e. Normally opened (NO) or Normally Closed (NC).
Door Locked Delay:
Summary of Contents for GARDiS Series
