07/2012
23
TCS TürControlSysteme AG
Subject to technical changes.
E-
Mail: [email protected] • www.tcsag.de
PI_IVW3012_0x10_uk.doc
Activate / deactivate zoom mode
The zoom mode can only be activated if a camera, with zoom function, is connected.
The zoom mode can be activated, if the live image is displayed: after an incoming door
call or after pressing the image button or speech button.
Press the image button longer than 4 sec to activate the zoom mode.
The symbol
zoom mode activated
is displayed in the live image.
Press the navigation buttons UP or DOWN to enlarge or reduce the image.
Press the navigation buttons RIGHT or LEFT to deactivate the zoom mode or automatic
deactivation after 4 sec.
Navigation within the image with the four navigation buttons
A camera with swivel function can be controlled with these buttons.
External image buffer
Images (or image sequences) can be stored with the external image buffer FVM1000. The
number of images per device is limited to 64, before the oldest image will be overwritten.
Make sure that the video indoor station IVW3012 is ready for operation.
Adjust the operation mode to comfort
at the FVM1000
.
End the programming mode.
Thus, the video indoor station IVW3012 recognizes
the FVM1000, an acknowledgement sounds.
The symbols of the image buffer for
automatic image
buffering activated
,
time setting
and
delete im-
age buffer
are visible in the main menu.
Note: The automatic image buffering is not activated.
Activate / deactivate the automatic image buffering
To
activate
the automatic image buffering, press
the button image button until an acknowledgement
tone sounds (longer than 4 sec) and the image
buffer indication lights yellow.
The symbol
image buffer
is displayed in the live
image.
When receiving a door call, an image is stored auto-
matically.
