07/2012
15
TCS TürControlSysteme AG
Subject to technical changes.
E-
Mail: [email protected] • www.tcsag.de
PI_IVW3012_0x10_uk.doc
front panel unit, inside
* terminating resistor not plugged:
For converting a device, the jumpers are retained by plugging each of them to only one of the contact pins.
Configuration
Factory Pre-settings
AS address dependent image activation
If front-door stations without camera are also installed in systems with IVW3011 video
front-door stations, the video image is not activated, if a call from a front-door station with-
out camera is incoming.
To guarantee this function, the possible AS addresses are separated in two sections:
AS address
0
– 31*
reserved for video
front-door stations
image is activated in case of a door call
(from max.16 video front-door stations)
AS address
ab 32*
free, for front-door
stations without cam-
era
image is not activated in case of a door call
*) The video AS border can be changed with the configuration software configo
TM
.
Note
:
The AS addresses of the front-door stations have to be allocated with Service Device or configuration software configo
TM
.
plugged
delivery state:
not plugged
terminating resistor
