10
07/2012
TCS TürControlSysteme AG
Subject to technical changes.
E-
Mail: [email protected] • www.tcsag.de
PI_IVW3012_0x10_uk.doc
1 Fixing the flush-mount box
Insert the lines through the cable gland.
Fix the flush-mount box with suitable screws to the wall or in the cavity wall. Ensure the
correct position: The arrow must face upwards!
The flush-mount box should be flush with the wall.
2 Connecting the lines
!
Use a suitable small screwdriver to connect the lines and to avoid damaging the de-
vice.
Strip insulation of the line ends.
Connect the lines according to the connecting diagram (see also labeling at the type
label).
connector socket
connection cable of the front panel unit
attachment
holes
3
1
2
cable gland
support plate (2 x)
cable compartment
(height ca. 10 mm)
arrow for
orientation
gspfeil
butterfly nuts
(4 x)
guide holes (2 x)
flush-mount box
!
