TCS ISW3330, Product Information

Page: 15 / 20

07/2015 15
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129 PI_ISW3330-uk 2 A
Configuration options
Function manually
configo
TM
as of vers. 1.7.x
ring tone volume
x
–
conversation volume
x
–
microphone sensitivity
x
–
select ring tones for door call 1, internal call and floor calls
–
x
ring tone for door call 2
–
x
change audio AS-border
–
x
ring tone for BW protocol
–
x
tone for group call protocol
–
x
determine the function of the floor push button (floor call /
control function 8, opener / closing contact)
–
x
always max. volume, volume control is deactivated (ON /
OFF)
–
x
optical and acoustic error indication ON / OFF
–
x
allocate to 3 groups
–
x
allocate serial numbers of up to 5 radio sensors
–
x
Configure groups

Each indoor station can be allocated to three different groups. Thus, an announcement
can be implemented e.g. at the floor and alternatively in a staircase.
Factory setting: all three with value 0, can be changed to
1 … 63.

The functions can be configured with the configuration so
ftware configo™.
!
During an announcement or during the loud tone output, the device is blocked for the
user. Also door calls, internal calls and floor calls are blocked.
Configure floor push button as call push button

Push button with a minimum switch time of 1 sec can be connected.

The configuration can be implemented only with the configuration
software configo™
!
The floor push button cannot be used for call acceptance and to allow the listen-in into
rooms.
Programming with Service Device TCSK-01

The indoor station is acting as a manually controlled duplex communication device. On-
ly searching for the device can be implemented
search for manually controlled duplex communica-
tion devices

Configuration is implemented with the configuration
software configo™.