10
07/2015
TCS TürControlSysteme AG, TCS Hotline Germany: [email protected]
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
PI_ISW3330-uk 2 A
Connect the lines
Minimise the length of the lines above the
lower cover in order to place the lines without
any problems and to prevent clamping the
lines when snapping-on the upper cover.
Connect the lines according to the labelling:
a b E P (from the buttom to the top), floor
push button at a
– E.
Wiring example see page 12.
Snap-on the upper cover
Place the upper cover at both adjustment
increments of the lower cover (
1
).
Snap-on the upper cover below with slight
pressure (
2
).
Open the device
There is a rectangular release opening at the
underside of the device. Insert a small
screwdriver straight and with slight pressure
into this opening.
The upper cover can be removed at the un-
derside (
1
).
Lift the upper cover off the two upper adjust-
ment increments (
2
).
1
2
1
2
Floor push button
