07/2015
13
TCS TürControlSysteme AG, TCS Hotline Germany: [email protected]
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
PI_ISW3330-uk 2 A
Connection diagram 3-wire technique
Commissioning
Install the devices of the system voltage-free and completely.
Check the a-, b- and P-wire against each other for short-circuits.
Switch ON the mains voltage.
Note (floor push button)
If the floor push button does not work, check if it is connected to the a-wire of the power
supply and control unit.
Error detection and indication
The optical and acoustic error indication is deactivated ex works. It can be activated for
service purposes with the configuration
software configo™ (see also
Information
, page
18).
