09/2011
17
TCS TürControlSysteme AG
Subject to technical modifications.
Mail: [email protected]
PI_IMM2300_Art0031160-uk.doc
Operation
Ring tone selection
In total, for 4 different incoming calls (door calls from 2 front-door stations, floor call, inter-
nal call) different ring tones can be adjusted.
1
End voice communication: press call OFF button for around 8 sec.
With the output of a signal tone the ring tone selection is activated.
By pressing the following buttons a ring tone can be selected. You can chose be-
tween 13 tones: 7 alpha tones, 6 gong tones.
2a
select ring tone from
the front-door station*
Press
door release button
until the desired ring tone
sounds. The ring tone selected last will be stored.
2b
select ring tone from
second front-door sta-
tion (if existing)
Then press the
speech button
until the desired ring tone
sounds. The ring tone selected last will be stored.
2c
select ring tone from
floor door
Press the
light switch button
until the desired ring tone
sounds. The ring tone selected last will be stored.
2d
select internal ring to-
ne
Press the
function key
until the desired ring tone sounds.
The ring tone selected last will be stored.
3
Press call OFF button shortly.
If no button is pressed for more than 8 sec, the device automatically terminates the
adjustment mode for ring tones. With the output of a signal tone, the ring tone se-
lection is deactivated.
* When first adjusting the ring tone, also the second front-door station is fitted with the same ring tone as the first one. If
the ring tone is adjusted separately (2b) for the second front-door station, it always has to be set independently.