6
Terms
Main door call
Door call from the door with the main serial number
(according to the serial number sticker on the device
and the packaging). Two main door calls from front-
door stations with AS = 0 and AS > 0 can be distin-
guished.
Sub door call
Call from a front-door station. Different ring tones can
be generated at an indoor station by using different
buttons.
Thus, the ring tone is distinguished by the used serial
number. The indoor station occupies an area of five
serial numbers: Main serial number SN (according to
serial number sticker), SN+1, SN+2, SN+3, SN+4.
Each of these serial numbers generate a different ring
tone.
Programming the bell buttons of the front-door station
can be realised with the Service Device TCSK-01 and
configo
TM
.
On-Screen-
Display (OSD)
The menu, which is shown on the screen and activat-
ed with the menu button (or image button) of the de-
vice.
Technical data
supply voltage:
+24 V
±
8 % (power supply and
control unit)
housing:
plastics (colors as listed in catalogue)
dimensions (in mm):
H 186 mm x W 101 mm x D 20 mm
space to operate (in mm):
H 186 mm x W 101 mm x D 22 mm
weight:
230 g
acceptable ambient temperature: -5 °C to 40 °C
input current (stand-by):
I(a) = 0.04 mA, I(P) = 13.5 mA
max. input current:
I(Pmax) = 130 mA
video module
TFT color module
screen diagonal
8.9 cm (3.5 inch)
resolution:
320 x 240 pixel, RGB
video signal input:
symmetric 1 Vss FBAS,
floor video input:
asymmetric 1 Vss FBAS,
Video 6-wire installation necessary!
