TCS AMI Series Product Information Download Page 14

Page: 14 / 20

05/2013

TCS TürControlSysteme AG, TCS Hotline Germany : [email protected]

Subject to technical changes.

Fax: +49 (0) 41 94 / 9 88 129

PI_AMI_FG-DISPLAY-uk 2A

display

keypad
module
AMI10300

jogwheel
module
AMI10400

Call a resident



Press the

bell button

The entered number is confirmed by an acknowledge-
ment tone (or voice output) and the display:

If the telephone does not respond resp. the front-door
station receives no acknowledgement, the following note
appears:

... via selection in the resident list

start,
select a name

browse in the
resident list

17:19

15,6°C

Adler-Apotheke

Arnold

Baumgarten, E.

Dombrowski, Alf

Frey

Rufen



Press the

UP or DOWN

button

two times.

The resident list is dis-
played.



Browse:

Press the

UP or DOWN

button

until the required

name is highlighted.



Turn the

jogwheel

care-

fully to get to the help
menu



Browse

Turn the

jogwheel

until

the required name is
highlighted.

Call a resident



Press the

bell button

The entered number is confirmed by an acknowledge-
ment tone (or voice output) and the display:

If the telephone does not respond resp. the front-door
station receives no acknoledgement, the following note
appears

Summary of Contents for AMI Series





















Search results

Summary of Contents for AMI Series

Reviews:

Related manuals for AMI Series

Brands by name

Popular brands

TCS AMI Series, Product Information

Search results

Summary of Contents for AMI Series

Reviews:

Related manuals for AMI Series

Brands by name

Popular brands