TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
NOTE:
when
adjust white balance,please do not change the data of the
WHITE G
and
BLACK G
,
only adjust the other two:
We suggest adjust
x=280,y=290
ƻ
3
Out going Setting
Outgoing setting, please keep the defaults setting but the special requirements.
Press Left/Righ key and waiting for about 5 seconds until “OK” displayed, which means the set
finish the initialization.
Please remember to do this when outgoing factory.
6 In System Programme for MS19 Chassis
Equipment required as follow:
Connecting board and VGA line as illustrated: Using Standard Parallel lines connects to PC via
Parallel socket, and VGA line connects to TV set via VGA Socket.
Notes: Please make sure Pin12 and Pin 15 of VGA line should
not
be NG.
Connects to PC
Connects to TV set
Chassis Name
Serial No.
Issued on
Page
Updated on
Version