TCL Multimedia Technology Holding Ltd. (ShenZhen Lab)
Chassis Name
Serial No.
Issued on
Page
Updated on
Version
Item
Sub-Item
Description
Works
PRODUCTING
Should adjust while assembling the set.
OK
FACTURY HOT
KEY
Short-cut key to enter factory mode setting:
GO BACK is the short-cut key if it is “ON”.
Do remember to set it at “OFF” if it out going.
OK
WARM UP
STATUS
Aging Mode setting:
“ON” means Snow Picture showing instead of Blue
Background if there is no signal input.
Do remember to set it at “OFF” if it out going.
OK
EEPROM INIT
EEPROM initialization:
1. When the first time to fires up the set, please
enter this menu and initialize it.
2. Press Left/Righ key and waiting for about 5
seconds until “OK” displayed, which means the set
finish the initialization.
3. switch off AC power
4. Power On it again, the EEPROM initialized.
5. Continue other alignment.
OK
STRUCTURE
Model No. Choose:
The software is compatible with a number of
models, such as:E62 for <L32E77S3 L32E62S3>,
M61-M71 for <L32M61S3, L32M71S3>
1. Choose the correct model No.
2. Power off, then Power on the set to make the
setting works.
OK
LOGO
LOGO Displayed or not.
ON:TCL LOGO displayed when turn on the set.
OFF: LOGO disappears.
