9
•
Neither the connection cable nor the mains cord must be kinked or squeezed.
Keep the connection cable and mains cord away from sharp edges, the hot
soleplate and any other sources of heat.
•
Only wind the mains cord around the cord storage, not the iron. Unwind the
mains cord before use.
•
Use tap water without additives such as perfumes, fabric softeners or starch.
Do not put vinegar, descaling products or other additives into the water tank.
Do not use carbonated water.
If the water in your district is extremely hard (more than 120 mg of calcium
per litre), mix tap water with distilled water at a ratio of 1:1.
•
Do not scratch the soleplate. Do not scrape the soleplate over metal parts
such as buttons or zip fasteners.
•
If the
water tank
indicator light comes on, switch off the appliance imme-
diately and add water.
Always put water into the water tank before ironing with steam, otherwise the
pump may be damaged.
•
Some types of varnish, synthetic substances or furniture polish may react
adversely to the material of the slip resistant feet, soften them and leave
unwanted traces on the work surface. Therefore, place a non-slip mat under
the product, if necessary.
•
There is a safety valve at the bottom of the pressurised steam container that
prevents too much pressure building up inside the container. Some water may
emerge from this valve during normal use. If necessary, place a waterproof
mat under the base station.
•
Empty the water tank on the base station after each use.
•
Remove any limescale residue from the pressurised steam container regularly
and at least every three months.
•
Only use the original accessories.
•
Do not use caustic, aggressive or abrasive products for cleaning or descaling.
