37
PHASER -
VINTAGE & SMOOTH
Vintage
The Vintage Phaser utilizes four All-pass
filters. These
filters creates a comb looking characteris-
tic. When the
filtered sound is mixed with the direct
sound the “phasing sound” occurs.
Speed
Range: 0.05 - 19.2Hz
The Speed of the Phaser.
Depth
Range: 0 - 100%
The Depth of the Phaser.
Range
Range: Low or Mid
The Range parameter determines the fre-
quency area in which the Phaser is oper-
ating.
Feedback
Range: -100 - 100%
The amount of processed signal that is
fed back to the Input of the effect block.
When the Feedback value is
negative, the Feedback signal is phase
reversed.
Try experimenting with the
reversed phase
Feedback.
FX Lev
Range: 0 - 100%
The level of the Phaser effect.
Smooth
The Smooth Phaser utilizes twelve All-
pass filters. These filters creates a comb
looking characteristic. When the
filtered sound is mixed with the direct
sound, the “phasing sound” occurs. Due
to the higher number of filters this
version of the Phaser sounds smoother
than Vintage.
Speed
Range: 0.05 - 19.2Hz
The Speed of the Phaser.
Depth
Range: 0 - 100%
The Depth of the Phaser.
Range
Range: Low or High
The Range parameter determines the fre-
quency area in which the Phaser is oper-
ating.
Feedback
Range: -100 - 100%
The amount of processed signal that is
fed back to the Input of the effect block.
Try experimenting with the
reversed phase
Feedback.
FX Lev
Range: 0 - 100%
The level of the Phaser effect.
Summary of Contents for M-ONE
Page 1: ...M ONE M ONE XL DUAL EFFECTS PROCESSORS U US SE ER R S S M MA AN NU UA AL L...
Page 2: ......
Page 6: ......
