background image

32

PARAMETRIC EQUALIZER

The M•ONE Equalizer is a three band
parametric type with an additional high and
low shelving band.

Low Shelving Band:

Low Freq

Range: 19.95Hz to 5.01kHz
Sets the target-frequency for the Low shelving
band.

Low Slope

Range: 3dB/oct - 12dB/oct
The Low Slope parameter sets the steepness
of the Low Shelving Band curve.

Low Gain

Range: -12dB - 12dB
The cut or boost of the Low shelving Band.

Parametric Filters:

Freq 1

Range: 19.95Hz to 20kHz
The target frequency for the first of the three
EQ bands.

BndWdth 1 - Bandwidth 1

Range: 0.1oct  - 4oct
The Bandwidth of the first EQ band.

Gain 1

Range: -12dB - 12dB
The cut or boost of this band.

Freq 2

Range: 19.95Hz to 20kHz
The target frequency for the second of the
three EQ bands.

BndWdth 2 - Bandwidth 2

Range: 0.1oct  - 4oct
The Bandwidth of the second EQ band.

Gain 2

Range: -12dB - 12dB
The cut or boost of this band.

Freq 3 

Range: 19.95Hz to 20kHz
The target frequency for the third of the three
EQ bands.

BndWdth 3 - Bandwidth 3

Range: 0.1oct  - 4oct
The Bandwidth of the third EQ band.

Gain 3 

Range: -12dB - 12dB
The cut or boost of this band.

High Shelving Band:

High Freq

Range: 501.2Hz - 20kHz
Sets the target frequency for the High Shelving
Band.

High Slope

Range: 3dB/oct - 12dB/oct
The High Slope parameter sets the steepness
of the High Shelving Band curve.

High Gain

Range: -12dB - 12dB
The cut or boost of the High Shelving Band.

FX Level

Range: 0 - 100%
The overall Output level of the Equalizer.

Summary of Contents for M-ONE















































Reviews: