TC Electronic M-ONE, User Manual

Page: 21 / 46

19
REVERB -
HALL
Low Color
Range: -50 - +50
This parameter adjusts the Decay time in the
lower frequency spectra. Remove rumble while
preserving the warmth of the Reverb Tail by
decreasing the lower frequency Decay time.
Reflect Level
Range: 0dB to -100dB
This parameter adjusts the level of the Early
Reflection.
Many older Reverbs did not utilize
Early Reflection patterns. Try
lowering the Reflect Level in order
to achieve this character.
Reverb Level
Range: 0dB to -100dB
This parameter adjusts the Reverb Tail level.
Lowering the Reverb Level will give you a
more ambient sound, since the Early
Reflection patterns will become more obvious.
Mod Type
Range: Off - Smooth - Vintage
Sets the Type of Modulation used on the
Reverb Tail.
Smooth: The Smooth modulation uses a
complicated modulation pattern, that allows the
Reverb Tail to be modulated without detuning
the original source signal.
Vintage: Many older reverbs used a very
simple modulation pattern that tended to
detune the original source slightly. The Vintage
modulation is an emulation of this old
modulation style, giving you the traditional
detuning effect in the ringout of the reverb.
Mod Speed
Range: -25 - +25
Sets the speed of the modulation. The speed
has been optimized for each Reverb type. The
+/-25 range is calculated as the variation from
this optimal setting.
Mod Depth
Range: -25 - +25
Sets the depth of the Modulation. The Depth
has been optimized for each Reverb type. The
+/-25 range is calculated as the variation from
this optimal setting.
FX Level
Range: 0 - 100%
The level of the entire effect.