TC Electronic Konnekt 24D, User Manual

Page: 56 / 67

FABRIK R
54
The Color parameter controls are advanced controls
handling the sonic spectrum of the Reverb diffuse field.
Try adding a bit of HiColor if you feel the level of reverb
is correct, but still doesn’t stand out as intended.
LoColor
LoColor adjustment of the Decay.
HiColor
HiColor adjustment of the Decay. This parameter selects
frequency area in focus.
HiFactor
The HiFactor parameter is used to enhance or attenuate
the frequency area set by the HiColor parameter.
Color page Distance/Level page
The relation between Dry, Early and Reverb levels
defines the perceived distance of a source. The less dry
the signal compared to Early and Reverb levels, the
greater the perceived distance. Early and Reverb levels
set the relation between the amount of room definition
compared to the reverb diffuse field.
If the Kill Dry button is pushed, Dry Level is fixed at off. If
the Kill Wet button is pushed, Early and Reverb Levels
are fixed at off.
Dry
Range: Off, -24dB to 0dB
Sets the amount of dry level passing through the
algorithm.
Early
Range: Off, -24dB to 0dB
The Early Reflections are the defining basis of the
Reverb diffuse field. Adjust the amount to set the
emphasis between the Early Reflections and the Reverb
diffuse field.
Reverb
Range: Off, -24dB to 0dB
The Reverb parameter sets the amount of applied
reflections from the Reverb diffuse field.