TC Electronic Konnekt 24D, User Manual

Page: 29 / 67

Input Section - Analog
1 Ch1/Ch2 auto-sensing input
Channel 1/2 connections on the front panel are auto-
sensing. They automatically detect whether you have
connected an XLR-plug (microphone) or 1/4” jack
jack (instrument), and indicate this graphically.
These are the options
Nothing connected XLR 1/4” jack
2 PAD/INST
On the Konnekt front panel you can set Input
sensitivity using the PAD/INST selector. When the
PAD icon is lit PAD (line level) sensitivity is selected.
This is the correct choice if you connect keyboards or
guitar pre-amps/pedals or similar.
When the LED is off the sensitivity is increased and
you can connect a guitar with passive pickups
directly.
3 Stereo Link (Mixer view)
Press Stereo Link to link channels 1 and 2 and/or 3
and 4 into stereo channels. This is an obvious choice
when monitoring a stereo source.
Input Section - Digital
To process an external digital signal it is imperative that
Konnekt is able to lock to this signal. The lock status is
indicated in this section:
4 One of the below indications will appear:
Lock
Konnekt is locked correctly to an external source.
No Ref
Konnekt cannot lock to an external digital signal.
Konnekt automatically switches to the internal clock.
5 Digital Input options
ADAT 1-8
All digital channels are reserved for ADAT channels
1-8.
ADAT 1-6 + S/PDIF 7-8
ADAT channels 1-6 is combined with the two digital
channels available on coaxial S/PDIF.
TOS 1-2 + S/PDIF 7-8
This setting allows for 2 channels of optical S/PDIF
(TOS) along side 2 channels of coaxial S/PDIF on the
coax (phono) connections.
SETUP PAGE
27