FABRIK C
45
Source Selection
Use the Source page to select which type of material you
are processing.
•
Grab the “S” and move the icon in vertical and
horizontal directions to select the source-type best
matching your source material.
Each type selects a carefully tuned combination of the
essential compression parameters: Attack, Release,
Threshold and Ratio.
For Vocals:
Female Vocal, Male Vocal, Speak, Choir
For Instruments:
Guitar, Piano, Horns, Bass
For Percussive material:
Kick, Snare, Perc, Kit
For full-range material:
Mix Rock, Mix soft, Mix Acoustic, Mix Purist
Compression
3-band and Full-band modes - Source page
Gain Control
The Gain settings are very important.
The higher set In Gain the harder the signal meets the
Compressor Threshold.
•
Grab the “G” and move the symbol in vertical and
horizontal directions to set both In Gain and Make up
gain with just one handle.
The Threshold is automatically set when the Source type
is selected, however, the Gain parameters determine how
hard the signal meets the Threshold.
Depending on how the Compressor parameters are set,
the level will change. The Make Up Gain parameter is
used to compensate for this level change.
In Gain Range: -18 to +18dB
Make Up Gain: -18 to +18dB
Compression
3-band and Full-band modes
Gain page
Summary of Contents for Konnekt 24D
