Stock No. 1656321 (03 5775)
7
Hoist/Sub-frame Assembly:
1.
Position the hoist into the sub-frame and secure with four 1/2” x 1 1/2” flange
bolts and nuts. To keep the hoist straight, align the saddle brackets of the hoist
with the corresponding brackets in the sub-frame.
(Figure 2)
NOTE:
Torque all 1/2” fasteners to 90 ft. lb.
NOTE:
Ensure that both saddle brackets are firmly seated against the bottom of the sub-
frame after the hardware is tightened. It may be necessary to clamp the saddle bracket
and sub-frame together to prevent a gap from existing between the two surfaces.
2.
Position the hoist with sub-frame on the truck frame as shown in Figure 3.
