Stock No. 1656321 (03 5775)
13
IMPORTANT:
All hoist and sub-frame grease fittings should be greased at least
every time the truck itself is greased.
12.
With the hoist and body completely installed, cycle the hoist several times to
rid the hydraulic circuit of air.
IMPORTANT:
Several different types of pump and hydraulic components are available
to power the HR-520. For installation information and operation, refer to the Installation
and Operation Manual for your particular pump and hydraulic components.
WARNING:
Installing or operating this hoist without first understanding the proper
installation and operation procedures can lead to serious injury or death. Always read and
understand fully all installation and operation manuals before installing or operating this
equipment.
Decal Locations:
Two 1654044 (03 6039) “Danger” decals are supplied with each HR-520. These
decals must be positioned as shown in Figure 9.
