TBB power RiiO Sun Series, User Manual

Page: 6 / 40

RiiO Sun User Manual
1
1. General Safety Instruction
1.1 Safety Instruction
As the dangerous voltage and the high temperature exist within the RiiO Sun All in One Solar
Inverter, only the qualified and authorized maintenance personnel is permitted to open and repair
it. Please make sure RiiO Sun All in One Solar Inverter is turned off before opening and repairing
it.
This manual contains information concerning the installation and operation of the RiiO Sun All in
One Solar Inverter. All relevant parts of the manual should be read prior to commencing the
installation. Please follow the local stipulation in the meantime.
Any operation against safety requirement or against the design, manufacture, safety standard are
out of the manufacturer warranty.
1.2 General precaution

DO NOT expose the inverter to the dust, rain, snow or liquids of any type, it is designed for
the indoor use. DO NOT block off ventilation, otherwise the RiiO Sun All in One Solar
Inverter would be overheating.

To avoid the fire and the electric shock, make sure all cables selected with right gauge and
connected well. Smaller diameter and broken cable are not allowed to use.

Please do not put any inflammable goods near to the inverter.

NEVER place the unit directly above batteries, the gases from the battery will corrode and
damage the RiiO Sun All in One Solar Inverter.

DO NOT place battery over RiiO Sun All in One Solar Inverter.
1.3 Precaution regarding battery operation

Use plenty of fresh water to clean in case the battery acid touches the skin, the clothing, or
eyes and consult with doctor as soon as possible.

The battery may generate flammable gas during charging. NEVER smoke or allow a spark
or a flame in the vicinity of the battery.

DO NOT put the metal tool on the battery, a spark and a short circuit might lead to a
explosion.

REMOVE all personal metal items such as rings, bracelets, necklaces, and watches while
working with batteries. Batteries can cause short-circuit current high enough to make metal
melt, and could cause severe burns.