background image

9

Owner’s Manual

COMPACT TILLER AND CULTIVATOR 

Get parts online at  

www.tazzoutdoorproducts.com 

or Call 

800-345-6007 

M-F 8-5 CST

FEATURES

The advantage of the Tazz® Compact Tiller Cultivator, over other tillers, is its low center of gravity and the ability to switch between 

tiller and cultivator in seconds with no tools!  To convert your full width tiller to a narrow cultivator, just pull the lock pins to re-

move the outer tines.  Then simply remove the hand knob bolts and pivot the handlebar back to remove the slide-on side shields.  

Refasten the handlebar to the pulley box to the desired height with the hand knob bolts and you’re ready to cultivate between 

narrow garden rows (see detailed illustrated instructions on page 12).  This tiller has been engineered to the highest standards by 

tilling experts who sought a light-weight, compact, and easily maneuverable tiller that can be used all season long.

FIGURE 1

NARROW CULTIVATING CONFIGURATION

DRIVE 

CONTROL 

LEVER

ADJUSTABLE FORWARD 

CONTROL CABLE

KNOBBY 

COMFORT 

GRIPS

TOOL-LESS

HANDLEBAR HEIGHT 

ADJUSTMENT

DURABLE BRONZE 

GEAR-DRIVE 

TRANSMISSION

PULLEY BOX

DURABLE 

TRANSPORT 

WHEELS

ADJUSTABLE DEPTH 

DRAG STAKE

HEAVY DUTY CAST IRON 

DRAG STAKE MOUNT

TOOL-LESS 

REMOVAL SIDE 

SHIELDS

Summary of Contents for 35310

























Reviews: