background image

2

Owner’s Manual

COMPACT TILLER AND CULTIVATOR 

Get parts online at  

www.tazzoutdoorproducts.com 

or Call 

800-345-6007 

M-F 8-5 CST

INTRODUCTION

Thank you for purchasing your product from Tazz®. We have worked to ensure that this product meets the highest standards for 

usability and durability. With proper care, your purchase will provide many years of service. 

Please read this entire manual before installation and use. Tazz® reserves the right to change, alter or improve the product and this 

document at any time without prior notice. Due to continuous product improvements, product images may not be exact. Some 

assembly may be required. 

Read and keep this manual for future reference. This manual contains important information regarding safety, assembly, operation 

and maintenance. The owner must be certain that all the product information is included with the unit. This information includes 

the manual, the replacement parts and the warranties. This information must be included to make sure state laws and other laws 

are followed. All persons to whom rent/loan this unit must have access to and understand this information. This manual should 

remain with the product even if it is resold. 

CONTENTS

Introduction/Contents ..................................................................................................................................................................................................................2
Hardware Identification Chart ....................................................................................................................................................................................................3
Warnings and Safety Precautions ..........................................................................................................................................................................................4-8
Features ..............................................................................................................................................................................................................................................9
Assembly ...................................................................................................................................................................................................................................10-14
Operation ..................................................................................................................................................................................................................................15-18
Maintenance and Storage ...................................................................................................................................................................................................18-21

Troubleshooting and Repair ......................................................................................................................................................................................................22

STOP! ACTIVATE YOUR WARRANTY BEFORE USE

All products must be registered

 within 30 days

 from the date of purchase in order to be covered under  

warranty. For more information regarding Warranty and Registration please review the Warranty and Regis-

tration terms and conditions expressed in the warranty insert. 

REGISTRATION AND SERVICE

Record the product model number and serial number in the 

space provided for easy reference when ordering parts or 

requesting technical support.  Excluding emissions-related 

warranty items, the warranty is valid only if the completed 

registration is received by Ardisam within 30 days of pur-

chase.  You can register your warranty online by visiting                           

www.tazzoutdoorproducts.com, or by mailing it to: Ardisam, 

1160 8th Avenue, Cumberland, WI 54829.  You may also call 

our Customer Service department at (800) 345-6007 Mondays 

through Fridays from 8 a.m. to 5 p.m. CST.

Serial 

Number 

Decal

Summary of Contents for 35310

























Reviews: