24
Models C708 & C716
Important: To the Operator
050628
To restore the message that identified the reason for
the soft lock, turn the power switch OFF for five
seconds, and then return the power switch to the
ON position. The original message with the reason
for the soft lock will be displayed.
HEAT TREAT FAILURE
REASON
>
HEAT FOR HEAT CYCLE
WASH TO BRUSH CLEAN
Note:
A record of Heat Cycle Data and Lock Out
History can be found in the Manager's Menu.
Manager's Menu
The Manager's Menu is used to enter the operator
function displays. To access the Menu, touch the
center of the CONE key on the control panel. The
arrow keys, the SEL key and the CONE key will be
lit when the ACCESS CODE screen is displayed.
Figure 10
In the Menu program, the arrow keys and the SEL
key will function as menu keys.
S
UP ARROW -
increases the value above the
cursor and is used to scroll upward in text
displays.
S
DOWN ARROW -
decreases the value
above the cursor and is used to scroll
downward in text displays.
S
SEL -
advances the cursor position to the
right and is used to select menu options.
There is a two minute time-out in effect during the
Manager's Menu. While in the Manager's Menu, if no
activity occurs within a two minute period, the
display will exit to the Main Menu. There is one
exception to this time-out, and that is the Current
Conditions Display.
Note:
The machine will continue operation in the
mode it was in when the Menu was selected.
However, the control keys will not be lit and are
non-functional when the Manager's Menu is
displayed. The control keys are functional in the
Manager's Menu when the CURRENT
CONDITIONS screen is displayed. (See CURRENT
CONDITIONS on page 32.)
Entering Access Code
With the ACCESS CODE screen on the display, use
the SEL key to set the first code number in the
cursor position. When the correct number is
selected, touch the SEL key to move the cursor to
the next number position.
ENTER ACCESS CODE
8
3
0
9
__
Continue to enter the proper access code numbers
(8309) until all four numbers are displayed, then
touch the SEL key. The Manager's Menu list will
display on the screen, provided the correct access
code is entered.
If an incorrect number is entered for the access
code, the display will exit the Menu program when
the SEL key is touched.
Figure 11
