Taylor Wawa C708, Operator'S Manual

Page: 18 / 66

14 Models C708 & C716 Operator Parts Identification
140312
X57029-XX Pump A. - Mix Simplified (Models C708 & C716)
Figure 5
ITEM DESCRIPTION PART NO.
1 - 7
PUMP ASSEMBLY - MIX
SIMPLIFIED SOFT SERVE X57029-XX*
1 CYLINDER-PUMP-HOPPER-SS 057943
2 PIN-RETAINING X55450
3 PISTON-PUMP-SIMPLIFIED 053526
4 O-RING 2-1/8” OD - RED 020051
5 CAP-VALVE BODY SS 056874-XX
6 GASKET-SIMPLIFIED PUMP
VALVE 053527
7 ADAPTOR - MIX INLET SS RED 054825
8 O-RING - 11/16 OD - RED 016132
9 PIN - COTTER 044731
10 SHAFT A.-DRIVE-MIX PUMP-
HOPPER X41947
ITEM DESCRIPTION PART NO.
10a CRANK-DRIVE 039235
10b SHAFT-DRIVE 041948
10c O-RING 1-3/4 OD X .139W 008904
10d O-RING 1/2 ID X .139W 048632
11 TUBE A.-FEED HOPPER (C708) X56521
12 TUBE A.-FEED RIGHT (C716) X59809
13 TUBE A.-FEED LEFT (C716) X59808
14 RING-CHECK .120 OD 056524
15 CLIP-MIX PUMP RETAINER 044641
16
SLEEVE A.- MIX PUMP *HT
X44761
*NOTE: THE STANDARD PUMP X57029-XX IS -14.
OVERRUN CAN BE CHANGED HIGHER OR LOWER
BY SUBSTITUTING THE CAP (056874-XX) WITH
CAPS AVAILABLE -1 THROUGH -20. THE HIGHER
THE DASH (-) NUMBER, THE HIGHER THE
OVERRUN.