Taylor C819, Operating Instructions Manual, Page: 33 / 49

29 Models C819 & C821 Operating Procedures
110602
IMPORTANT! Step 40 must be performed
using the grill cleaning pad and holder
indentified on page 9, ONLY.
Using any other pad
and holder will damage the release material sheets.
Note: Contact your local Taylor Distributor to
purchase the correct grill cleaning pad and holder.
(See page 9.)
Step 40
Place the release material sheets flat on the lower
grill surface. Gently clean both sides of the sheets
with an approved high temperature grill cleaner and
the grill cleaning pad and holder.
Figure 59
Step 41
Rinse both sides of the release material sheets with
a clean, sanitizer-soaked grill cloth.
Figure 60
Step 42
Place the release material sheets on a clean,
sanitized, flat surface to air dry overnight.
Step 43
Wipe the lower grill surface with a clean,
sanitizer-soaked grill cloth. Repeat until no visible
soil remains.
Step 44
Remove and empty the grease cans.
Figure 61
Step 45
Wash, rinse, and reinstall the grease cans.
24 Hour Stores Only:
Step 45
Re-install the release material sheets on the
opposite side than previously used. Secure the
sheets with the release material clips and retainers.
Start up the grill per the instructions starting on
page 11.
Figure 62