Taylor C819, Operating Instructions Manual, Page: 15 / 49

11 Models C819 & C821 Operating Procedures
110531
Section 6 Operating Procedures
The Models C819 and C821 are 24” (610 mm) grills.
The C819 is equipped with two independent 12”
(305 mm) upper platens and the Model C821 is
equipped with one independent 12” (305 mm) upper
platen.
These grills are capable of cooking a variety of
products and feature two cooking options. They
provide all the features of a flat grill as well as the
advantages of two-sided cooking.
Note: The two platen Model C819 has been
selected to illustrate the step-by-step procedures.
For grills equipped with less than two platens,
perform the following steps as appropriate for your
grill platen configuration.
Daily Opening Procedures
Before operating the grill, the release material
sheets must be installed on the upper platens. The
release material sheets are reversed and rotated on
a daily basis (black side vs. brown side.)
Perform the following steps for installing the release
material sheets:
CAUTION: Make sure the grill is COOL
before attempting to install or remove release
material sheets.
Step 1
Slide the release sheet retainer through the hemmed
end of the release material sheet.
Figure 5
Step 2
Hook the release sheet retainer on the release
material shoulder screws at the top of the upper
platen.
Figure 6