![background image](http://html.mh-extra.com/html/taylor-made/kw-series/kw-series_manual_823342005.webp)
5
CCD-0004215
Rev: 02.18.21
Installation
1.
Assemble Steps 1 to 5 on dry land to avoid possibly dropping parts
into the open water.
2.
Use the enclosed cardboard template
(Fig.1)
to measure the outer
diameter of the ski bar and to determine the correct machine screw length.
3.
Place the flagpole coupler — the part that holds the flagpole — onto
the top of the mount.
Note:
Make sure to align the two slots on the top of the mount
(Fig.2A) to the bottom of the coupler (Fig.2B).
4.
Insert the smallest machine screw (Part G), M10x25
(Fig.3A)
, through
the main body and into the underside of the coupler
(Fig.3B)
. Using the
included hex wrench, tighten firmly but do not overtighten.
Fig.1
Fig.2
Fig.3
B
A
5.
Use the mini level
(Fig.4)
to ensure the flagpole holder is level when
attached to the ski bar. Remove the self-adhesive backing then affix the
level to the flat top side of the mount. Remove when finished mounting
the flagpole holder.
Fig.4
B
A