![background image](http://html1.mh-extra.com/html/taylor-dunn/tt-416/tt-416_operators-manual_3773864036.webp)
Page 36
TT-416 Stand Up Tow Tractor
MT-416-00
Troubleshooting
This is a summary troubleshooting guide to determine possible cause and resolution of operator
correctable issues.
This is not an all inclusive guide and does not include repair items to performed by a qualified
technician.
Not Running
•
If the dash display is off:
• Confirm the start switch is turned to the run position.
• Confirm all emergency stop switches are in the run position.
• Confirm the battery connector is properly engaged.
• If problem not corrected, then refer repair to a qualified technician.
•
If the dash display is on:
• Confirm battery doors are properly installed.
• Confirm there is no debris under the left floorboard on the operator platform.
• Confirm battery has sufficient charge.
• If problem not corrected, then refer repair to a qualified technician.
Running Slow
• Confirm battery is charged.
• Confirm High/Low speed switch is in the normal speed (rabbit) position.
• If problem not corrected, then refer repair to a qualified technician.
Runs Only in One Direction
• Refer repair to a qualified technician.
Hard to Steer
• Confirm start switch is in run position.
• Refer repair to a qualified technician.
The only personnel authorized to repair, modify, or adjust any part of this or any Taylor-
Dunn vehicle is a factory authorized service technician. Repairs made by unauthorized
personnel may result in damage to the vehicles systems which could lead to an unsafe
condition resulting in severe bodily injury and/or property damage. Unauthorized repairs
may also void the vehicles warranty.
WARNING